New software v8.6 BETA



What's new in software v8.6 BETA (build 27744) 2026-10-28:

  • Mercedes/MAN/DAF/Volvo/Renault AGS (Wabco; AS Tronic lite) memory operations via JTAG/BDM (License AGS)
  • Mercedes ICUC01T (Dashboard; MP4) memory operations via DC/OBD (License MB INS)
  • Mercedes MCM2/MCM2.1 "Operation Hours" parameter (write price 10 tokens)
  • Mercedes Unimog CGW04T memory operations via OBD/DC (License MB CGW)
  • Mercedes ECUs show CAL-ID and CVN numbers during connect
  • Mercedes ACM3 "CVN fix" operation (price 50 tokens; some ECUs can't be done)
  • Mercedes GS2 checksums
  • MAN AGS (Wabco; AS Tronic lite) memory operations via DC (License AGS)
  • MAN EBS5 (Knorr-Bremse) memory operations via DC/OBD (License EBS)
  • MAN EBS5 (Knorr-Bremse) configuration read/write (write price 20 tokens)
  • MAN TCU/E300 (Voith; DIWA5) memory operations via DC/OBD (License TCU Voith)
  • MAN MD1CE100 + PTM/CVM2 pairing operations (pairing price 50 tokens)
  • MAN CVM2 keys information
  • MAN CVM2 "Speed limit" parameter read/write (write price 20 tokens)
  • MAN CVM2 "Torque limit" parameter read/write (write price 20 tokens)
  • MAN PTM checksums
  • IVECO VCM3 checksums
  • IVECO VCM2/VCM3 key status information
  • IVECO VCM3 WP8/WP9 Flash/EEPROM memory operations via DC/OBD (License IVECO VCM)
  • IVECO VCM3 WP10 EEPROM read via DC/OBD (FLASH all operations and EEPROM write operation still not supported) (License IVECO VCM)
  • IVECO VCM3 WP10 PIN read over DC/OBD (License IVECO CALC)
  • SCANIA COO7/COO8 configuration read/write (write price 20 tokens)
  • SCANIA TMS1/TMS2 configuration read/write (write price 20 tokens)
  • DAF ECS+IMMO pairing operation via OBD (price 20 tokens)
  • DAF VECU, ECS "Speed limit" parameter read/write (write price 20 tokens)
  • DAF IMMO, ECS keys information
  • DAF ECS VIN parameter (write price 5 tokens)
  • VOLVO CIOM IMMO On/Off operations (price 5 tokens)
  • Cummins CM2450A/B memory operations via DC (CM2450B only read, no write yet; checksums also are checked/corrected)
 
Application:

  • App now supports "Dark mode"
  • App automatically install newer version, if connected VEI needs it
  • App's side elements (Menu and Log) now are scalable
  • Enable Beta versions for your VEI V8 (Setting tab)
  • Protected MCM2.1 D5 (2026 year) shown as "Locked: yes (protected)". Contact support team about unlock procedure.

New ECU versions:
  • Mercedes CPC4 diagnosis version 020011
  • IVECO VCM3 VIN, PIC, "Speed limit" parameters for VCMu_SW_WP10_rel61, VCMu_SW_WP10_rel75
  • EDC17CV44 from Sinotruck
     
Changes:
  • MAN PTM memory operations via DC/OBD/JTAG was completely reworked (faster and safer now; both Internal + External FLASH should be given)
  • old CPC5 cable (without GPT) is supported now (was "error 3.5" during connect before)

Fixed:

  • Mercedes TCM, MCM, CDI4 unpair operation fix (before ECU after operation was still paired)
  • Mercedes MCM2.1 "firmware lock/unlock" operations in BSL mode (was "error 0.3" before)
  • Mercedes ACM3 configuration/parameters write (was "error 3.5" on some versions)
  • Mercedes FMR connect via OBD (was "error 3.5" on some versions)
  • Mercedes INS2010 connect via DC/OBD fixed (before "error 0.3" was generated during diag version read on some versions)
  • Mercedes MCM connect via DC/OBD fixed (before "error 0.3" was generated during dataset number read on some versions)
  • Mercedes MR2 (A8) "power correction" parameter (wrong values were displayed)
  • Mercedes ECUs connect via DC1 cable (was "error 0.3")
  • Freightliner CPC4 parameters write (was "error 3.5" for some ECU versions)
  • MAN PTX connect via DC2 (supports all PTM cables now)
  • MAN EBS5 (Knorr-Bremse) JTAG memory operations (was "error 3.F" because of unexpected FLASH chip)
  • MAN PTM+MD1CE100 "sync info" and "pairing" operations via OBD
  • MAN CVM2 speed limit write (was "error 0.3")
  • MAN MS6.x memory operations (was "error 0.3")
  • IVECO VCM2 (VCM_SW_WP4_rel7) "Speed limit" operations (before wrong value was returned)
  • VOLVO connect via OBD (was "error 0.3" is some cases)
  • VOLVO EMS 2.2 parameters/immo operations (was "unavailable function" for some ECU versions)
  • DAF GS3.6 connect via DC2 (was "error 0.3")
  • KAMAZ connect via OBD (was "Internal error" in some cases)
  • Volvo EMS 2.2 connect via DC2 (was "error 0.3")
  • Mercedes CPC5 GPT memory operations (was "calculation server error")
  • DAF ECS+IMMO pairing operation via OBD (was "ECU does not allow to do operation" or "Verification failed" errors)
  • DAF ECS "speed limit" parameter operations (was "error 3.5")