Software v7.5 version (Stable)
2024-01-18
What's new in software v7.5 build 20238 (2023-02-14):
- Scania EMS S8 memory operation via JTAG/DC/OBD (needs License Scania EMS S8)
- Scania EMS S7 memory operations via JTAG/DC/OBD (needs License Scania EMS S7)
- Scania COO8 memory operations via JTAG (needs License COO8)
- DAF GS3.6 support (needs License GS3 BSL)
- DAF EBS3 (needs DC2U-EBS34 cable)
- EDC17CV44 memory operations by GPT and BSL (needs License ECU EDC17CV44)
- UCV/FR (Brazil Mercedes) memory operations via DC (needs "updated" UCV/FR DC2 cable);
- Change of RPM for MBench PLD Lite operations;
- Show message to change Internet provider, if VPN is detected during update
New ECU versions:
- FR version 0740
- EDC7UC31 version B.0.2
- MCM2.1 diag version 00221B
- MD1CE101 (Iveco) version 4.5.4 new variant added
Changes:
- JTAG memory write operations are much faster now (for TCM, EBS4/EBS3, COO7/COO8, PTM, EMS S8)
- for PTM immo operations use diagnostic algo (all PTM versions should be supported now)
- JTAG memory write operations are much faster now (for CPC3, CPC3 Evo)
- MBench renamed to "MBench PLD Lite"
- MBench connect moved from Mercedes to ECU tab
- MBench page was redesigned
Fixed:
Merged licenses (*):- Locked MCM2.1 memory operations & other calc server related operations (unpairing etc.)
- CPC5 speed limit in cruise mode
- COO red CAN speed detection was improved (before speed was not detected very often)
- DC1 does not need updates ;
- BDM operations fixed for EBS5 Knorr (MAN), EBS5 Knorr (Mercedes), EDC7C32 (MAN), EDC7UC31 (Iveco), CR4 (Mercedes);
- Pairing/VeDoc operations for locked MCM2.1 (was infinite "please wait" progress before)
- Missed DAF GS3.6 A and B variants were added to ECU tab
- Wrong "boot mode" was always reported for INS/GM/FPS ECUs
- Show correct error message "unsupported version" for memory operation with unknown Scania EMS S8 versions (was "error 0.3" before)
- PTM-MD1 pairing info is not supported yet so silently skipped during keys info (was "error 3.5" before)
- WS (Mercedes) faults reading (was "error 3.5" on some old trucks)
- TCM pairing operations become available only after "Read keys info"
- MB CPC3 + MB CPC3Evo = MB CPC3
- MB CALC + SFTP CALC = MB CALC
- MCM OBD + MCM DC + MCM2 OBD + MCM2 DC = MB MCM2
- MCM2.1 OBD + MCM2.1 DC = MB MCM2.1
- ACM2 OBD + ACM2_DC + ACM2.1 OBD + ACM2.1 DC = MB ACM2/2.1
- MCM/ACM BSL + MCM2.1 BSL = MB ACM/MCM BSL
- MAN EDC7 GPT + MAN EDC7 OBD + EDC7 BDM = MAN EDC7
- IVECO EDC7 GPT + IVECO EDC7 OBD + EDC7 BDM = IVECO EDC7
- MAN EDC17 GPT + EDC17 BSL = MAN EDC17
- IVECO EDC17 GPT + EDC17 BSL = IVECO EDC17
- IVECO VCM2 + VCM2 BSL + VCM3 BSL = IVECO VCM
* Note: All devices which have Update/support subscription in software v7.5 will get renewed and merged licenses. Example: if device had MAN EDC7 GPT license, now it will have a functionality of MAN EDC7 OBD also.