Knorr-Bremse EBS5 for MAN trucks
Knorr-Bremse EBS5 (electronic braking system) modules can be found not only in Mercedes-Benz trucks, but also in MAN trucks. In this article we are going to introduce you these modules and what programming possibilities are to this day with Truck Explorer.
EBS5 can be found in Euro 6 MAN trucks.
- This module has MPC562 processor.
- Flash: S29CD016J
- EEPROM: 95640
Programming functions:
Truck Explorer software gives you the opportunity to connect and work with these EBS5 control units from MAN trucks.
Available functions:
- Read/write full memory (flash&eeprom) in BDM mode.
- Can be used to access damaged EBS module and recover files
- Recover faulty EBS module
- Cloning
Video how to read/write EBS5 from MAN truck in BDM mode.
Requirements to work with EBS5:
- VEI V6/V7 device
- Direct Connect 2U tool with OBD2 power cable
- DC2U-EBS5-MAN Knorr cable
- DC2U-ISP-BDM-JTAG dongle
- DC2U-BDM7 or BDM10 open flex adapters
- Power Supply
- License DC2
- License EBS
- Truck Explorer software v7.0 or greater
When you have all the needed equipment ready - connect everything as in the picture above.
Note: for BDM mode you need to open EBS and solder adapter. Manual how to do that you will find in your MyVEI user account.
Open Truck Explorer app. In software choose:
- MAN
- Direct Connect BSL/JTAG/…
- BDM EBS5 MPC562 (Knorr)
- Press connect
When connected, go to "Memory-EBS" tab and press memory analyze.
Read/write flash & eeprom operations will appear.
